Construction of 4000 Meter Manned Submersible Begins with Order for Titanium Hemispheres and Carbon Fiber Cylindrical Hull

Manned submersible will reach over 50% of the ocean to increase human exploration of the undersea world.

Everett, WA, December 8, 2016 – OceanGate Inc., an operator of manned submersibles, has started the construction of the Cyclops 2 with an order for two titanium hemispheres and two matching titanium to carbon fiber interface rings from Titanium Fabrication Corp. (TiFab), the world's largest fabricator of reactive metals, and an order for a 56” diameter, 100” long carbon fiber main cylinder from Spencer Composites Corp. (SCC).

Cyclops 2

The two titanium hemispheres form the ends of the submersible’s cylindrical pressure hull that protects five crew members during dives to depths of 4,000 meters (13,125 feet). The forward hemisphere houses a 21” diameter acrylic viewport – the largest viewport of any submersible capable of these depths.

Design and engineering of Cyclops 2 began in 2013. These two orders begin the construction phase of the project. In parallel, the team is also developing a mobile subsea launch and recovery system for the submersible.

“Construction of Cyclops 2 is a significant milestone in human exploration of the ocean. When completed, it will be the only privately owned submersible in the world that can take 5 people to these depths,” said Stockton Rush, CEO of OceanGate.

“TiFab and Spencer Composites are the ideal choices to fabricate these vital components of our new submersible. Their depth of experience, quality of work, and ability to produce these large custom shapes with exceptional precision are critical to constructing a manned submersible that can safely dive two and half miles deep”, said Rush.

Fabrication of the titanium and carbon fiber components are planned to begin immediately, with delivery scheduled for Spring 2017. When delivered, the hemispheres will be mated to each end of the filament wound carbon fiber main cylinder that forms the center section of the submersible’s pressure hull.

Following assembly of the three main components, the pressure hull will be independently tested to ensure vessel integrity before the final installation of electronics, navigation and life support systems. Most of these systems to be used on Cyclops 2 are currently in use on Cyclops 1, OceanGate’s submersible that can dive to depths of 500 meters. The first in-water dives for Cyclops 2 are planned for late 2017.

“OceanGate is clearly a leading innovator in the development of manned submersibles”, said Dan Williams, VP Sales of TiFab. “I am very impressed with their team’s efforts to increase human exploration of the deep ocean”.

About Titanium Fabrication Corp.

Titanium Fabrication Corp. (TiFab) is the world's largest fabricator of reactive metals including titanium, zirconium and high nickel alloys fabrication. With three facilities in North America, TiFab serves a broad range of industries including: Chemical/Petrochemical, Oil & Gas, Pulp & Paper, Mining, and the Military. Primary materials of construction are titanium and zirconium, but the company also fabricates with high nickel alloys including Hastelloy®, Inconel®, Monel® and more.

About Spencer Composites Corp.

Spencer Composites Corp. (SCC) was founded in 1994 and is located in Sacramento, California. Spencer Composites fabricates composite products and components using thermoset and thermoplastic processes, has expertise in thick-wall composite processing, and is experienced in the processes of filament winding, pultrusion, RTM, VARTM, press molding, autoclave curing, and hand layup.

###

Media Inquiries

+1 (425) 249-2719
media@oceangate.com

Press Releases:

OceanGate and the University of the Bahamas Establish Partnership for the Advancement of Ocean Awareness through Exploration and Education more info

Oceangate Expeditions has Selected Island Offshore as the Preferred Partner for 2019 Titanic Survey Expedition and Ongoing Deep Sea Exploration more info

SeaDoc Society Partners with the OceanGate Foundation to Explore the Depths of the Salish Sea in a Manned Submersible more info

World's Largest Carbon Fiber Manned Submersible Hull Proven to 4000 Meters more info

OceanGate and Virtual Wonders Join Forces to Create Photorealistic 3D Interactive Experiences of the RMS Titanic more info

OceanGate Reschedules Titanic Survey Expedition to 2019 more info

OceanGate Expeditions Selects Falck Safety Services for Helicopter Underwater Egress Training for Titanic Survey Expedition more info

OceanGate Inc., Splashes a 5-man Submersible to Survey the RMS Titanic and Explore the World's Oceans to Depths of 4,000 Meters more info

OceanGate Inc., Appoints Dianna Raedle, CEO of New York-Based Deer Isle Group, LLC to Board of Directors more info

OceanGate and 2G Robotics to Laser Scan the RMS Titanic Shipwreck and Debris Field more info

Titanic Survey Expedition: OceanGate Expeditions Announces the First Manned Submersible Survey of the World’s Most Famous Shipwreck since 2005 more info

Construction of 4000 Meter Manned Submersible Begins with Order for Titanium Hemispheres and Carbon Fiber Cylindrical Hull more info

OceanGate Conducts the First Submersible Dives to the Legendary Andrea Doria Shipwreck in 20 Years more info

OceanGate installs iXBlue Inertial Navigation System more info

OceanGate Inc. Completes Launch and Recovery System for Manned Submersibles

OceanGate Inc. Launches New Manned Submersible, Cyclops